Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T15:51:13.763Z Has data issue: false hasContentIssue false

Measurement of Thin Film Mechanical Properties Using Nanoindentation

Published online by Cambridge University Press:  29 November 2013

Get access

Extract

One of the simplest ways to measure the mechanical properties of a thin film is to deform it on a very small scale. Because indentation testing with a sharp indenter is one convenient means to accomplish this, nanoindentation, or indentation testing at the nanometer scale, has become one of the most widely used techniques for measuring the mechanical properties of thin films. Other reasons for the popularity of nanoindentation stem from the ease with which a wide variety of mechanical properties can be measured without removing the film from its substrate and the ability to probe a surface at numerous points and spatially map its mechanical properties. The utility of the mapping capability is illustrated in Figure 1, which shows several small indentations made at selected points in a microelectronic device. The hardness and modulus of the device were determined at each point. In addition to microelectronics, nanoindentation has also proved useful in the study of optical coatings, hard coatings, and materials with surfaces modified by ion implantation and laser treatment.

Information

Type
Mechanical Behavior of Thin Films
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable