Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T14:55:46.350Z Has data issue: false hasContentIssue false

Nanostructured Cerium Oxide “Ecocatalysts”

Published online by Cambridge University Press:  03 May 2012

Get access

Extract

Catalysts based on cerium oxide are now used as effective oxidation systems in numerous environmental applications. Cerium oxide was introduced into the catalysis field relatively recently, in 1976, and not as a catalyst initially. Rather, it was chosen as the key oxygen-storage component of the three-way catalyst (TWC) used in automotive exhausts. Accordingly, ceria is used to extend the air/fuel ratio window in the exhaust gas, releasing or accepting oxygen, respectively, under fuel-rich or fuellean conditions, so that the noble metal catalyst operates at the desirable stoichiometric air/fuel ratio, at which it effectively converts all three gaseous pollutants—CO, hydrocarbons, and NO—to innocuous products. A solid solution of cerium and zirconium oxides is used in today's catalytic converters because of its higher oxygen-storage capacity (OSC) compared with pure ceria. In the years that followed the introduction of ceria into the catalytic converter, many additional merits of cerium oxide were realized, first as an active catalytic component of the TWC and subsequently as a catalyst and sorbent in various industrial applications. A review article by Trovarelli on ceria-based catalysts is a good recent compilation.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable