Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T19:38:06.763Z Has data issue: false hasContentIssue false

Organic and Inorganic Spin-On Polymers for Low-Dielectric-Constant Applications

Published online by Cambridge University Press:  29 November 2013

Get access

Extract

Low-dielectric-constant materials (k < 3.0) have the advantage of facilitating manufacture of higher performance integrated-circuit (IC) devices with minimal increases in chip size. The reduced capacitance given by these materials permits shrinkage of spacing between metal lines to below 0.25 μm and the ability to decrease the number of levels of metal in a device. The technologies being considered for low-k applications are chemical vapor deposition (CVD) or spin-on of polymeric materials. For both types of processes, there are methods and materials capable of giving k < 3.0 dielectric stacks. This article will focus on the spin-on approach and discuss the properties of both organic and inorganic spin-on polymers.

While CVD SiO2 has been the mainstay of the industry, spin-on materials are appropriate for many dielectric applications. Polyimides have applications as electrical insulators, and traditional spin-on silicates or siloxanes (k > 3.0) have served as planarizing dielectrics during the last 15 years. The newer spin-on polymers have greatly enhanced mechanical, thermal, and chemical properties, exhibiting lower dielectric constants than the traditional materials.

Information

Type
Low-Dielectric-Constant Materials
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable