Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T06:49:30.965Z Has data issue: false hasContentIssue false

The piezoelectronic transistor: A nanoactuator-based post-CMOS digital switch with high speed and low power

Published online by Cambridge University Press:  12 November 2012

D.M. Newns
Affiliation:
IBM Research Division, T.J. Watson Research Center; dmnewns@watson.ibm.com
B.G. Elmegreen
Affiliation:
IBM Research Division, T.J. Watson Research Center; bge@us.ibm.com
X.-H. Liu
Affiliation:
IBM Research Division, T.J. Watson Research Center; xhliu@us.ibm.com
G.J. Martyna
Affiliation:
IBM Research Division, T.J. Watson Research Center; martyna@us.ibm.com

Abstract

Moore’s law of transistor scaling, the exponential increase in the number of complementary metal oxide semiconductor (CMOS) transistors per unit area, continues unabated; however, computer clock speeds have remained frozen since 2003. The development of a new digital switch, the piezoelectronic transistor (PET), is designed to circumvent the speed and power limitations of the CMOS transistor. The PET operates on a novel principle: an electrical input is transduced into an acoustic pulse by a piezoelectric element which, in turn, is used to drive a continuous insulator-to-metal transition in a piezoresistive element, thus switching on the device. Performance is enabled by the use of key high response materials, a relaxor piezoelectric, and a rare-earth chalcogenide piezoresistor. Theory and simulation predict, using bulk material properties, that PETs can operate at one-tenth the present voltage of CMOS technology and consuming 100 times less power while running at multi-GHz clock speeds. A program to fabricate prototype PET devices is under way.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2012
Figure 0

Figure 1.The piezoelectronic transistor and components. (a) The piezoelectronic transistor (PET)15,16 showing gate, common, and sense contacts, and the piezoelectric (PE) and piezoresistive (PR) elements. The device is surrounded by a mechanical clamping structure fabricated from a high yield material (HYM—semitransparent, light blue). Typical dimensions for a post-complementary metal oxide semiconductor device would be {l = 2 nm, w = 4 nm, W = 20 nm, L = 26 nm}. (b) Piezoresistive response of the SmSe PR material,13 showing an exponential drop of resistance (ρ) under pressure (p) until metallization occurs at 3.5–4 GPa. Note: l, thickness of piezoresistor; w, width of piezoresistor; a, area of piezoresistor; L, thickness of piezoelectric; W, width of piezoelectric; A, area of piezoelectric.

Figure 1

Figure 2.Functional mechanism of the piezoresistive material.13,14 (a) Top, rock salt lattice of SmSe. Bottom, band structure of SmSe showing filled j = 5/2 4f sub-band in gap, and empty 5d conduction band; Eg denotes the bandgap between 4f and 5d bands. Note: purple atoms = Sm; red atoms = Se. (b) Top, SmSe lattice under isostructural compression. Bottom, effect of pressure p on bands. 4f band moves close to the bottom of the 5d band, enabling promotion of 4f electrons into the conduction band, allowing the system to become an electrical conductor.

Figure 2

Figure 3.Complementary piezoelectronic transistors (PETs) for piezotronic logic.15,16 The piezoelectric in a PET may be poled in two opposite directions (blue piezoelectric, green piezoresistor); the orange arrow shows the polarization direction; purple areas are the contacts labeled sense, common, and gate. (a) Illustration shows poling sense for a positive voltage Vgc (gate-common voltage drop) to expand the piezoelectric and compress the piezoresistor. (b) Illustration shows poling sense for a negative voltage Vgcto expand the piezoelectric and compress the piezoresistor. These choices form noninverting and inverting PETs, respectively. The corresponding circuit symbols are illustrated at left; conventionally a bubble at the input signifies inversion.

Figure 3

Figure 4.Modeling and simulation of a piezoelectronic transistor (PET) inverter chain.15,16 (a) A chain of PET inverters. The complementary PET is denoted by the bubble next to the bars denoting the PE (shown as a capacitor). (b) Simulation of PET performance at scale, frequency scale (left scale) shows inverse switching time in a chain of 9 inverters for PETs of selected geometries; clock speed (right scale) is based on 15 logic steps per clock cycle. Horizontal scale is line voltage (VDD). Device dimensions as per Figure 1a. Note: Vin, input voltage ; Vout, output voltage; 0, 0 V on the ground line in the circuit; A, area of the piezoelectric; a, area of the piezoresistor; L, thickness of the piezoelectric; l, thickness of the piezoresistor; W, width of the piezoelectric; w, width of the piezoresistor; PR, piezoresistor. The results show multi-GHz performance at low voltage.