Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T15:44:51.009Z Has data issue: false hasContentIssue false

Science and Applications of Mixed Conductors for Lithium Batteries

Published online by Cambridge University Press:  31 January 2011

Get access

Introduction

Mixed conductors show significant mobility of both electronic and ionic species and were the subject of an earlier review in MRS Bulletin.1 The current review is restricted to those mixed conductors of interest for use in lithium batteries, with an emphasis on commercialization. The first lithium batteries were primary cells using pure lithium anodes and carbon monofluoride or manganese oxide as the cathode. Both were developed in Japan, the former for use in fishing floats and the latter for calculators and similar small devices. Such primary cells based mainly on MnO2 or FeS2 cathodes are still extensively used in watches, cameras, and so on. Lithium primary cells are also the main power source for many medical devices, such as pacemakers. In some of these applications, silver vanadate is the cathode.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable