Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-14T21:32:41.240Z Has data issue: false hasContentIssue false
  • English
  • Français

Science and Technology of Solid-Oxide Fuel Cells

Published online by Cambridge University Press:  31 January 2011

S. C. Singhal
Get access

Extract

The high oxygen-ion conductivity over wide ranges of temperature and oxygen pressure in stabilized cubic zirconia has led to its use as a solid-oxide electrolyte in a variety of electrochemical applications. Zirconia-based oxygen sensors are widely used for combustion control, especially in automobiles, for atmosphere control in furnaces, and as monitors of oxygen concentration in molten metals. Other applications include electrochemical pumps for control of oxygen potential, steam electrolyzers, and high-temperature solidoxide fuel cells (SOFCs). High-temperature SOFCs offer a clean, pollution-free technology to electrochemically generate electricity at high efficiencies. These fuel cells provide many advantages over traditional energy-conversion systems, including high efficiency, reliability, modularity, fuel adaptability, and very low levels of NOx and SOx emissions. The quiet, vibrationfree operation of SOFCs also eliminates the noise usually associated with conventional power-generation systems. Furthermore, because of the high temperature of operation (~1000°C) of SOFCs, naturalgas fuel can be reformed within the cell stack, eliminating the need for an expensive external reformer system. Also, pressurized SOFCs can be successfully used as replacements for combustors in gas turbines; such hybrid SOFC/gas-turbine power systems are expected to reach efficiencies approaching 70%.

Information

Type
Research Article
Information
MRS Bulletin , Volume 25 , Issue 3: Solid Electrolytes: Advances in Science and Technology , March 2000, pp. 16 - 21
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Appleby, A.J. and Foulkes, F.R., eds., Fuel Cell Handbook (Van Nostrand Reinhold, New York, 1989) p. 579.Google Scholar
2.Singhal, S.C., ed., Solid Oxide Fuel Cells I (The Electrochemical Society, Pennington, NJ, 1989).Google Scholar
3.Grosz, F., Zegers, P., Singhal, S.C., and Yamamoto, O., eds., Solid Oxide Fuel Cells II (Commission of the European Communities, Luxembourg, 1991).Google Scholar
4.Singhal, S.C. and Iwahara, H., eds., Solid Oxide Fuel Cells III (The Electrochemical Society, Pennington, NJ, 1993).Google Scholar
5.Dokiya, M., Yamamoto, O., Tagawa, H., and Singhal, S.C., eds., Solid Oxide Fuel Cells IV (The Electrochemical Society, Pennington, NJ, 1993).Google Scholar
6.Stimming, U., Singhal, S.C., Tagawa, H., and Lehnert, W., eds., Solid Oxide Fuel Cells V (The Electrochemical Society, Pennington, NJ, 1995).Google Scholar
7.Singhal, S.C. and Dokiya, M., eds., Solid Oxide Fuel Cells VI (The Electrochemical Society, Pennington, NJ, 1999).Google Scholar
8.Lessing, P.A., Tai, L.W., and Klemm, K.A., in Solid Oxide Fuel Cells I, edited by Singhal, S.C. (The Electrochemical Society, Pennington, NJ, 1989) p. 337.Google Scholar
9.Milliken, C. and Khandkar, A., in Solid Oxide Fuel Cells I, edited by Singhal, S.C. (The Electrochemical Society, Pennington, NJ, 1989) p. 361.Google Scholar
10.Arai, H., in Proc. SOFC-Nagoya (Japan Fine Ceramics Center, Nagoya, Japan) p. 9.Google Scholar
11.Minh, N.Q., Horne, C.R., Liu, F., Staszak, P.R., Stillwagon, T.L., and Van Ackeren, J.J., in Solid Oxide Fuel Cells I, edited by Singhal, S.C. (The Electrochemical Society, Pennington, NJ, 1989) p. 307.Google Scholar
12.Singhal, S.C., in Solid Oxide Fuel Cells VI, edited by Singhal, S.C. and Dokiya, M. (The Electrochemical Society, Pennington, NJ, 1999) p. 39.Google Scholar
13.Mori, H., Omura, H., Hisatome, N., Ikeda, K., and Tomita, K., in Solid Oxide Fuel Cells VI, edited by Singhal, S.C. and Dokiya, M. (The Electrochemical Society, Pennington, NJ, 1999) p. 52.Google Scholar
14.Anderson, H.U., Kuo, J.H., and Sparlin, D.M., in Solid Oxide Fuel Cells I, edited by Singhal, S.C. (The Electrochemical Society, Pennington, NJ, 1989) p. 111.Google Scholar
15.Yamamoto, O., Takeda, Y., Kanno, R., and Kojima, T., Solid State Ionics 22 (1987) p. 241.CrossRefGoogle Scholar
16.Lau, S.K. and Singhal, S.C., “Potential Electrode/ Electrolyte Interactions in Solid Oxide Fuel Cells,” Corrosion 85 (National Institute of Corrosion Engineers, Boston, 1985) Paper 345.Google Scholar
17.Yamamoto, O., Takeda, Y., Kanno, R., and Kojima, T., in Solid Oxide Fuel Cells I, edited by Singhal, S.C. (The Electrochemical Society, Pennington, NJ, 1989) p. 242.Google Scholar
18.Kilner, J.A. and Steele, B.C.H., in Nonstoichiometric Oxides, edited by Sorensen, O.T. (Academic Press, New York, 1981) p. 233.CrossRefGoogle Scholar
19.Dell, R.M. and Hooper, A., in Solid Electrolytes, edited by Hagenmuller, P. and van Gool, W. (Academic Press, New York, 1978) p. 291.CrossRefGoogle Scholar
20.Strickler, D.W. and Carlson, W.G., J. Am. Ceram. Soc. 47 (1964) p. 122.CrossRefGoogle Scholar
21.Isenberg, A.O., in Electrode Materials and Processes for Energy Conversion and Storage, edited by McIntyre, J.D.E., Srinivasan, S., and Will, F.G. (The Electrochemical Society, Princeton, NJ, 1977) p. 572.Google Scholar
22.Pal, U.B. and Singhal, S.C., J. Electrochem. Soc. 137 (1990) p. 2937.CrossRefGoogle Scholar
23.Srilomsak, S., Schilling, D.P., and Anderson, H.U., in Fuel Cell Handbook, edited by Appleby, A.J. and Foulkes, F.R. (Van Nostrand Reinhold, New York, 1989) p. 129.Google Scholar
24.Kuo, L.J.H., Vora, S.D., and Singhal, S.C., J. Am. Ceram. Soc. 80 (1997) p. 589.CrossRefGoogle Scholar
25.Singhal, S.C., in Solid Oxide Fuel Cells IV, edited by Dokiya, M., Yamamoto, O., Tagawa, H., and Singhal, S.C. (The Electrochemical Society, Pennington, NJ, 1993) p. 195.Google Scholar