Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T17:57:52.086Z Has data issue: false hasContentIssue false

Supramolecular Approaches to Nanoscale Dielectric Foams for Advanced Microelectronic Devices

Published online by Cambridge University Press:  31 January 2011

Get access

Extract

The increasing demands of miniaturization in the microelectronics industry has forced continual improvement in the materials that are used in the fabrication of semiconductor devices. Advances in photoresists for microlithographic applications have reduced the feature size to 0.25 µm and below, and this drive to eversmaller features, coupled with the introduction of copper, has placed increasing demands on the dielectric material. Materials with lower dielectric constants (depicted in dark gray in Figure 1) are therefore required to more efficiently insulate these submicron features, such as the copper interconnect lines used to connect the transistors and memory cells in these advanced multilevel devices (Figure 1). This allows the minimization of crosstalk, signal delays, and power consumption. While vapor-deposited silicon dioxide and other derivatives are currently being employed, they suffer from unacceptably high dielectric constants (ε > 3.6) and are unacceptable for future generations of microelectronic devices.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable