Hostname: page-component-7b7567c8c-tnzcf Total loading time: 0 Render date: 2026-11-14T04:22:48.706Z Has data issue: false hasContentIssue false
  • English
  • Français

The Synthesis of Photocatalysts Using the Polymerizable-Complex Method

Published online by Cambridge University Press:  31 January 2011

Masato Kakihana and
Kazunari Domen
Get access

Extract

Fine powders of semiconducting oxides loaded with deposited metal and/or metaloxide particles have been widely used as heterogeneous photocatalysts for innumerable chemical reactions. Among the many photocatalytic reactions, the splitting of water assisted by light has become one of the most active areas in heterogeneous photocatalysis, since it can be a promising chemical route for energy renewal and energy storage. The photocatalytic splitting of water on TiO2 electrodes, discovered by Fujishima and Honda in 1972, is a prototypic example of this technique, and there is a vast body of literature describing the potential application of TiO2-based photocatalysts for water decomposition. This has brought about a burst of research related to the development of many other photocatalytic systems.

Information

Type
Research Article
Information
MRS Bulletin , Volume 25 , Issue 9: Soft Processing for Advanced Inorganic Materials , September 2000, pp. 27 - 31
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Fujishima, A. and Honda, K., Nature 37 (1972) p. 238.Google Scholar
2.Domen, K., Takata, T., Hara, M., and Kondo, J.N., Bull. Chem. Soc. Jpn. 73 (2000) p. 1307.Google Scholar
3.Domen, K., Kudo, A., Shinozuka, A., Tanaka, A., Maruya, K., and Onishi, T., J. Chem. Soc., Chem. Commun. (1986) p. 356.Google Scholar
4.Domen, K., Kudo, A., Shibata, M., Tanaka, A., Maruya, K., and Onishi, T., J. Chem. Soc., Chem. Commun. (1986) p. 1706.Google Scholar
5.Kudo, A., Tanaka, A., Domen, K., Maruya, K., Aika, A., and Onishi, T., J. Catal. 111 (1988) p. 67.Google Scholar
6.Sayama, K., Tanaka, A., Domen, K., Maruya, K., and Onishi, T., Cat. Lett. 4 (1990) p. 217.CrossRefGoogle Scholar
7.Kudo, A., Sayama, K., Tanaka, A., Asakura, K., Domen, K., Maruya, K., and Onishi, T., J. Catal. 120 (1989) p. 337.CrossRefGoogle Scholar
8.Domen, K., Yoshimura, J., Sekine, T., Tanaka, A., and Onishi, T., Catal. Lett. 4 (1990) p. 339.Google Scholar
9.Takata, T., Furumi, Y., Shinohara, K., Tanaka, A., Hara, M., Kondo, J.N., and Domen, K., Chem. Mater. 9 (1997) p. 1063.Google Scholar
10.Takata, T., Shinohara, K., Tanaka, A., Hara, M., Kondo, J.N., and Domen, K., J. Photochem. Photobiol., A 106 (1997) p. 45.Google Scholar
11.Ikeda, S., Hara, M., Kondo, J.N., Domen, K., Takahashi, H., Okubo, T., and Kakihana, M., Chem. Mater. 10 (1998) p. 72.CrossRefGoogle Scholar
12.Ikeda, S., Hara, M., Kondo, J.N., Domen, K., Takahashi, H., Okubo, T., and Kakihana, M., J. Mater. Res. 13 (1998) p. 852.Google Scholar
13.Takahashi, H., Kakihana, M., Yamashita, Y., Yoshida, K., Ikeda, S., Hara, M., and Domen, K., J. Alloys Compd. 285 (1999) p. 77.Google Scholar
14.Takata, T., Shinohara, K., Tanaka, A., Hara, M., Kondo, J.N., and Domen, K., in Advanced Catalytic Materials—1996, edited by Lednor, P.W., Ledoux, M.-J., Nagaki, D.A., and Thompson, L.T. (Mater. Res. Soc. Symp. Proc. 454, Pittsburgh, 1997) p. 177.Google Scholar
15.Pechini, M.P., U.S. Patent No. 3,330,697 (1967).Google Scholar
16.Yamashita, Y., Yoshida, K., Kakihana, M., Uchida, S., and Sato, T., Chem. Mater. 11 (1999) p. 61.Google Scholar
17.Eror, N.G. and Anderson, H.U., in Better Ceramics Through Chemistry II, edited by Brinker, C.J., Clark, D.E., and Ulrich, D.R. (Mater. Res. Soc. Symp. Proc. 73, Pittsburgh, 1986) p. 571.Google Scholar
18.Anderson, H.U., Pennel, M.J., and Guha, J.P., in Advances in Ceramics: Ceramic Powder Science, Vol. 21, edited by Messing, G.L., Mazdiyasni, K.S., McCauley, J.W., and Harber, R.A. (American Ceramic Society, Westerville, OH, 1987) p. 91.Google Scholar
19.Kakihana, M., J. Sol.-Gel Sci. Technol. 5(1996) p. 7.Google Scholar
20.Kakihana, M. and Yoshimura, M., Bull. Chem. Soc. Jpn. 72 (1999) p. 1427.CrossRefGoogle Scholar
21.Lessing, P.A., Ceram. Bull. 68 (1989) p. 1002.Google Scholar
22.Simmons, L.L., Lowden, L.F., and Ehlert, T.C., J. Phys. Chem. 81 (1977) p. 706.Google Scholar
23.Gopalakrishan, J. and Bhat, V., Inorg. Chem. 26 (1987) p. 4299.CrossRefGoogle Scholar
24.Rebbah, H., Desgardin, G., and Raveau, B., J. Solid State Chem. 31 (1980) p. 321.CrossRefGoogle Scholar
25.Takahashi, H., Kakihana, M., Yamashita, Y., Yoshida, K., Ikeda, S., Hara, M., and Domen, K., Phys. Chem. Chem. Phys. 2 (2000) in press.Google Scholar