Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T11:03:23.020Z Has data issue: false hasContentIssue false

3D Structure Fabrication by FIB Milling and Deposition

Published online by Cambridge University Press:  26 February 2011

Toshiaki Fujii
Affiliation:
toshiaki.fujii@siint.co.jp, SII NanoTechnology Inc., Engineering Department, 36-1 Takenoshita, Oyama-cho, Sunto-gun, 412-0026, Japan
Koji Iwasaki
Affiliation:
koji.iwasaki@siint.co.jp, SII NanoTechnology Inc., Oyama-cho, Sunto-gun, Shizuoka, 410-1393, Japan
Masanao Munekane
Affiliation:
masanao.munekane@siint.co.jp, SII NanoTechnology Inc., Oyama-cho, Sunto-gun, Shizuoka, 410-1393, Japan
Yo Yamamoto
Affiliation:
yo.yamamoto@siint.co.jp, SII NanoTechnology Inc., Oyama-cho, Sunto-gun, Shizuoka, 410-1393, Japan
Toshitada Takeuchi
Affiliation:
toshitada.takeuchi@siint.co.jp, SII NanoTechnology Inc., Oyama-cho, Sunto-gun, Shizuoka, 410-1393, Japan
Masakatsu Hasuda
Affiliation:
masakatsu.hasuda@siint.co.jp, SII NanoTechnology Inc., Oyama-cho, Sunto-gun, Shizuoka, 410-1393, Japan
Yutaka Ikku
Affiliation:
yutaka.ikku@siint.co.jp, SII NanoTechnology Inc., Oyama-cho, Sunto-gun, Shizuoka, 410-1393, Japan
Hiromi Tashiro
Affiliation:
hiromi.tashiro@siint.co.jp, SII NanoTechnology Inc., Oyama-cho, Sunto-gun, Shizuoka, 410-1393, Japan
Tatsuya Asahata
Affiliation:
tatsuya.asahata@siint.co.jp, SII NanoTechnology Inc., Oyama-cho, Sunto-gun, Shizuoka, 410-1393, Japan
Masahiro Kiyohara
Affiliation:
masahiro.kiyohara@siint.co.jp, SII NanoTechnology Inc., Oyama-cho, Sunto-gun, Shizuoka, 410-1393, Japan
Takashi Kaito
Affiliation:
takashi.kaito@siint.co.jp, SII NanoTechnology Inc., Oyama-cho, Sunto-gun, Shizuoka, 410-1393, Japan
Get access

Abstract

Focused Ion Beam (FIB) system is equipment used to make a wide variety of micro and Nano structures. Structures can be created using various materials by irradiating focused gallium ion beam on to the surface of specimens and by sputtering, etching and ion beam induced deposition. In order to realize greater diversity for nano construction by using the FIB system, we have developed technologies incorporating:

- Built-in pattern signal generator

- Multiple Gas Unit for gas assisted etching and beam induced deposition

- A precision wheel for the stage.

This latest FIB system has a narrow Ion beam with a diameter of better than 4nm. Beam current is controlled from 0.15pA to 20nA. These performances contribute significantly to the study 3D structures fabrication and modification.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable