Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T13:40:07.675Z Has data issue: false hasContentIssue false

Abrasive Effects in Oxide Chemical Mechanical Polishing

Published online by Cambridge University Press:  10 February 2011

Uday Mahajan
Affiliation:
Department of Materials Science and Engineering and Engineering Research Center for Particle Science and Technology, University of Florida, Gainesville, FL 32611
Marc Bielmann
Affiliation:
Department of Materials Science and Engineering and Engineering Research Center for Particle Science and Technology, University of Florida, Gainesville, FL 32611
Rajiv K. Singh
Affiliation:
Department of Materials Science and Engineering and Engineering Research Center for Particle Science and Technology, University of Florida, Gainesville, FL 32611
Get access

Abstract

In this study, we have characterized the effects of abrasive properties, primarily particle size, on the Chemical Mechanical Polishing (CMP) of oxide films. Sol-gel silica particles with very narrow size distributions were used for preparing the polishing slurries. The results indicate that as particle size increases, there is a transition in the mechanism of material removal from a surface area based mechanism to an indentation-based mechanism. In addition, the surface morphology of the polished samples was characterized, with the results showing that particles larger than 0.5 μm are detrimental to the quality of the SiO2 surface.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable