Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T08:54:20.398Z Has data issue: false hasContentIssue false

An overview of simple basic equations used in HLW glass dissolution modeling: consequences for long term leaching and element profiles

Published online by Cambridge University Press:  21 March 2011

Marc Aertsens*
Affiliation:
Waste and Disposal Department, SCK•CEN, Boeretang 200, B-2400 Mol, Belgium. maertsen@sckcen.be
Get access

Abstract

Over the last decades, several models describing glass dissolution have been published. Starting from the basic equations in their simplest form, the relationships between models are evaluated to address the following questions: 'What is the relationship between their basic assumptions?, What is the resulting long term leach rate? and, Which element profiles do they allow one to predict?' Although not part of it, this paper could complement the European project GLAMOR, where two models describing the dissolution of glass in a water solution, the r(t) and the GM models, are used by several groups to fit the same sets of experimental data. In this paper, other models are considered as well and all models are compared with each other.

From comparison with the Boksay model, which uses the same equations, a simplification is suggested for the GM model concerning the water diffusion in the glass. The use of the numerical code developed to solve part of it, can mostly be avoided by using the analytical solution of the Boksay model.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable