Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T17:41:51.595Z Has data issue: false hasContentIssue false

Analysis of Electrochemical Performance of Single Step Co-fired Solid Oxide Fuel Cell (SOFC) Analyzed Using Polarization Model and Impedance Spectroscopy

Published online by Cambridge University Press:  01 February 2011

Kyung Joong Yoon
Affiliation:
kjyoon@bu.edu, Boston University, Mechanical Engineering, Boston, Massachusetts, United States
Srikanth Gopalan
Affiliation:
sgopalan@bu.edu, Boston University, Mechanical Engineering, Boston, Massachusetts, United States
Uday B. Pal
Affiliation:
upal@bu.edu, Boston University, Mechanical Engineering, Boston, Massachusetts, United States
Get access

Abstract

Anode-supported planar solid oxide fuel cell (SOFC) was successfully fabricated by a single step co-firing process. The cell comprised of a porous Ni + yittria-stabilized zirconia (YSZ) anode support, a porous and fine-grained Ni + YSZ anode active layer, a dense YSZ electrolyte, a fine-grained porous Ca-doped LaMnO3 (LCM) + YSZ composite cathode active layer, and a porous LCM cathode current collector layer. The cell was tested between 700˜800oC with humidified hydrogen (97% H2+3% H2O) as fuel and air as oxidant. The measured maximum power densities were 1.42W/cm2 at 800°C, 1.20W/cm2 at 750°C, and 0.87W/cm2 at 700°C. The cell was also tested at 800oC with various compositions of oxidant, and cell parameters including the area specific ohmic resistance, exchange current density, and anodic and cathodic limiting current densities were determined using the polarization model and impedance spectroscopy.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable