Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T08:26:18.192Z Has data issue: false hasContentIssue false

Application of polyimide sacrificial layers for the manufacturing of uncooled double-cantilever microbolometers

Published online by Cambridge University Press:  01 February 2011

Shusen Huang
Affiliation:
sshuang@bu.edu, Boston University, Department of Manufacturing Engineering, United States
Xin Zhang
Affiliation:
xinz@bu.edu, Boston University, Department of Manufacturing Engineering, United States
Get access

Abstract

In this paper, a low-temperature surface micromachining module with two sacrificial layers of polyimide is developed for the manufacturing of double-cantilever microbolometer focal plane arrays. The use of spin-on polyimide allows an all-dry final release step overcoming stiction problems often encountered in wet sacrificial etching processes. For the patterning of the polyimide, a plasma-enhanced chemical vapor deposited silicon oxide is employed as a mask layer. Anisotropic etching of both the mask film and the polyimide layer is accomplished by reactive ion etching. After patterning structural layers, sacrificial etching of the polyimide is conducted using an isotropic dry etch process in high-density oxygen plasma.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable