Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T13:55:57.266Z Has data issue: false hasContentIssue false

Approaches For Reduction Of The Defect Density In Group III Nitride Based Heterostructures

Published online by Cambridge University Press:  17 March 2011

T. S. Zheleva
Affiliation:
US Army Research Laboratory, Attn: AMSRL-SE-EM, 2800 Powder Mill Road, Adelphi, MD 20783, USNorth Carolina State University, Box 7907, Raleigh, NC 27695-7907
F. Karoui
Affiliation:
North Carolina State University, Box 7907, Raleigh, NC 27695-7907
K. Kirchner
Affiliation:
US Army Research Laboratory, Attn: AMSRL-SE-EM, 2800 Powder Mill Road, Adelphi, MD 20783, US
M. Derenge
Affiliation:
US Army Research Laboratory, Attn: AMSRL-SE-EM, 2800 Powder Mill Road, Adelphi, MD 20783, US
K. A. Jones
Affiliation:
US Army Research Laboratory, Attn: AMSRL-SE-EM, 2800 Powder Mill Road, Adelphi, MD 20783, US
R. D. Vispute
Affiliation:
Department of Physics, University of Maryland, College Park, MD 20742.
T. Venkatesan
Affiliation:
Department of Physics, University of Maryland, College Park, MD 20742.
Get access

Abstract

Lateral epitaxial overgrowth (LEO), pendeo-epitaxy (PE), and solid-phase epitaxial recrystallization (SPER) are discussed as three approaches for reducing the defect density in group III nitride based heterostructures. Studies of the LEO GaN and PE GaN revealed, that a major factor for the defect reduction in the laterally overgrown regions is the change of the dominant growth direction - from vertical in the window regions to lateral in the regions over the mask or over the trenches, and the related threading dislocations lines redistribution. The mechanisms of defect reduction in LEO GaN and PE GaN are similar, although they arise through different process routes, and are related to the free-standing (PE) or quasi-free-standing (LEO) growth of GaN, and the associated stress redistribution. The stress distributions in the LEO and PE GaN heterostructures are calculated and compared with finite element modeling. Another approach for reduction of the defects is the SPER process and the related thermal activation for dislocation reactions and grain boundary mobility and migration. This approach is shown in the example of annealed AlN films.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable