Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T11:08:44.267Z Has data issue: false hasContentIssue false

Atomistic Modeling of Alumina/Epoxy Adhesion

Published online by Cambridge University Press:  19 April 2013

F.O. Valega Mackenzie*
Affiliation:
Delft University of Technology, Dept. Materials Science & Engineering, Mekelweg 2, 2628 CD Delft, The Netherlands.
B. J. Thijsse
Affiliation:
Delft University of Technology, Dept. Materials Science & Engineering, Mekelweg 2, 2628 CD Delft, The Netherlands.
Get access

Abstract

In this work we report a specialized reactive force field (ReaxFF) developed for the study of alumina/epoxy interfaces. Force field parameters were obtained by fitting the reactions of small clusters and separate components of epoxies on alumina surfaces in the alpha phase. We also introduce a procedure to obtain crosslinked epoxies based on a proximity criterion to drive reactions and induce crosslinking. Properties of the resulting polymer, like the coefficient of thermal expansion, are found to be of the same order of magnitude as in experiments. Molecular dynamics was used to calculate the adhesion between these polymers and different alumina surfaces: Al2O3-deficient, Al-terminated, O-terminated, 12% and 75% hydroxylated. Typical values for strong adhesion are about 0.70 J/m2 which compare well with previously reported works. The role of defects is also studied.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2013

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable