Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T04:14:11.689Z Has data issue: false hasContentIssue false

Behavior of High Performance Concrete Under High Temperature (60-450°C) for Surface Long-Term Storage: Thermo-Hydro-Mechanical Residual Properties

Published online by Cambridge University Press:  21 March 2011

C. Gallé
Affiliation:
Direction du Cycle du Combustible DESD/SESD CEA Saclay, 91191 Gif-sur-Yvette, France
J. Sercombe
Affiliation:
Direction du Cycle du Combustible DESD/SESD CEA Saclay, 91191 Gif-sur-Yvette, France
M. Pin
Affiliation:
Direction du Cycle du Combustible DESD/SESD CEA Saclay, 91191 Gif-sur-Yvette, France
G. Arcier
Affiliation:
UFR de mécanique, Université Joseph Fourier Grenoble 1, 38041 Grenoble cedex 9, France
P. Bouniol
Affiliation:
Direction du Cycle du Combustible DESD/SESD CEA Saclay, 91191 Gif-sur-Yvette, France
Get access

Abstract

After various thermal treatments (up to 450°C), residual thermo-hydro-mechanical (T-H-M) properties of two OPC high performance concretes (HPC) were analyzed in the context of surface long-term storage. Materials were prepared with silico-calcareous aggregates (standard HPC) and hematite aggregates (heavy HPC). The initial microstructural (porosity ≈10%) and transport (gas permeability ≈10-19 m2) properties are similar for both concretes. As far as the mechanical aspect is concerned, heavy HPC shows a higher compressive strength and elastic modulus than standard HPC (78 and 63 MPa, 81 and 49 GPa, respectively). Heavy HPC is also characterized by a higher thermal conductivity (7.3 W m-1 K-1 compared to 2.7 W m-1 K-1 for standard concrete). Results analysis show that thermo-hydro-mechanical damages are smaller for heavy HPC. Between 60 and 250°C, the elastic modulus and the compressive strength of standard HPC decrease by 40% and 16%, respectively. For heavy HPC, these parameters respectively decrease by 10% and 4%. A similar trend was observed for thermal conductivity evolution. Gas permeability and porosity data confirm the good behavior of heavy HPC. As a conclusion, hematite HPC seems to provide more interesting T-H-M residual properties than standard HPC. Limited thermal expansion and thermal gradients induced by hematite are probably responsible of this behavior.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable