Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T19:46:07.032Z Has data issue: false hasContentIssue false

Binder Microstructures Developed during the Hydration Process in the System Portland Cement – Calcium Aluminate Cement – Calcium Sulfate

Published online by Cambridge University Press:  02 March 2016

Andreea M. Moncea
Affiliation:
National Institute for Research and Development in Environmental Protection, 294 Splaiul Independenței, Bucharest, 060031, ROMÂNIA
Ana M. Panait
Affiliation:
National Institute for Research and Development in Environmental Protection, 294 Splaiul Independenței, Bucharest, 060031, ROMÂNIA
György Deák
Affiliation:
National Institute for Research and Development in Environmental Protection, 294 Splaiul Independenței, Bucharest, 060031, ROMÂNIA
George Poteraș
Affiliation:
National Institute for Research and Development in Environmental Protection, 294 Splaiul Independenței, Bucharest, 060031, ROMÂNIA
Get access

Abstract

Lately, the investigations of binders from ternary system Portland cement (PC), calcium aluminate cement (CAC) and calcium sulfate ( $C\overline S$ ), have gone through a larger stage of development due to their special properties such as fast setting and rapid hardening, early strength, non-efflorescence, etc. These special properties are ensured by the binder’s microstructure, developed through hydration processes and reactions between hydrate components, which allows us to use them in special environments (aggressive environments with very low or very high level of pH, environments with high temperature, etc.). The binders from this system were simply named “dry mortars”, and provide the final user with an easy processing. In order to explain the mechanical behavior of the specimens exposed in normal curing conditions (T = 20 ± 2 °C and R.H. ≈ 95%), and with different percentages of calcium sulfate (added as hemihydrate or anhydrite), research on the microstructure of the hardened system was performed using SEM and XRD investigation techniques. The analyses have been performed on the binder pastes, hydrated for 1 and 28 days. The tests results showed that the specimen with anhydrous $C\overline S$ content had the best mechanical behavior.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable