Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-12T07:13:42.092Z Has data issue: false hasContentIssue false
  • English
  • Français

Biosensing in microfluidic channels using Fluorescence Polarization

Published online by Cambridge University Press:  15 February 2011

Vamsi K. Yadavalli and
Michael V. Pishko
Vamsi K. Yadavalli
Affiliation:
Department of Chemical Engineering and the Materials Research Institute The Pennsylvania State University University Park, PA 16802, USA
Michael V. Pishko
Affiliation:
Department of Chemical Engineering and the Materials Research Institute The Pennsylvania State University University Park, PA 16802, USA
Get access

Abstract

Microfabricated microfluidic devices provide useful platforms for sensing and conducting immunoassays for high throughput screening and drug discovery. Here, Fluorescence Polarization has been used as a technique for probing binding events within 500 micron and smaller microfluidic channels fabricated in poly (dimethyl siloxane) (PDMS). The binding of concanavalin A to a lectin-dextran and a glycoproteinacetylcholinesterase has been used to demonstrate the homogeneous, ratioing format of fluorescence polarization for the quick and accurate determination of extremely low (nanomole) concentrations. Polarization has also been used to sense for a poly-aromatic hydrocarbon (PAH) within a microfluidic channel using binding to an antibody. We have also demonstrated a simple pH sensor based on the change in anisotropy of a pH sensitive fluorophore. The ease of fabrication and measurement using such polarization-based devices make them extremely suitable for micro-sized sensors, assays and total analysis systems.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 773: Symposium N – Biomicroelectromechanical Systems (BioMEMS) , 2003, N7.11
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

[1]Nasir, M. S. and Jolley, M. E., Combinatorial Chemistry & High Throughput Screening 2 (1999) pp.177–190 Google Scholar
[2]Dandliker, W. B. and Feigen, G. A., Immunochemistry 10 (1970) pp.219–227 Google Scholar
[3] Lippitsch, M. E., Sensors and Actuators B 11 (1993) pp.499–502 Google Scholar
[4] Lakowicz, J. R., Gryczynski, I., Gryczynski, Z. and Dattelbaum, J. D., Analytical Biochemistry 267 (1999) pp.397–405 Google Scholar
[5] Gryczynski, I., Gryczynski, Z., Rao, G. and Lakowicz, J. R., The Analyst 124 (1999) pp.1041–1044 Google Scholar
[6] Kostov, Y. and Rao, G., Review of Scientific Instruments 71 (2000) pp.4361–4374 Google Scholar
[7] Rogers, M. V., Drug Discovery Today 2 (1997) pp.156–160 Google Scholar
[8] Haugland, R. P., Handbook of Fluorescent Probes and Research Products, Molecular Probes, Eugene, OR, 2002 Google Scholar
[9] Yadavalli, V. K., Koh, W.G., Lazur, G. J. and Pishko, M. V., submitted for publication (2002)Google Scholar
[10] Carlsson, K., Liljeborg, A., Andersson, R. M. and Brismar, H., Journal of Microscopy 199 (2000) pp.106–114 Google Scholar
[11] Xu, Z., Rollins, A., Alcala, R. and Marchant, R. E., Journal of Biomedical Materials Research 39 (1998) pp.9–15 Google Scholar
[12] Lakowicz, J. R. in Principles of Fluorescence Spectroscopy, Plenum Press, New York, 1983 Google Scholar