Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T03:05:58.468Z Has data issue: false hasContentIssue false

Blanket and Local Crystallographic Texture Determination in Layered Al Metallization

Published online by Cambridge University Press:  15 February 2011

K. P. Rodbell
Affiliation:
IBM Research Division, Yorktown Heights, NY 10598
J. L. Hurd
Affiliation:
IBM Analytical Services Group, Hopewell Junction, NY 12533
P. W. DeHaven
Affiliation:
IBM Analytical Services Group, Hopewell Junction, NY 12533
Get access

Abstract

The effect of microstructure, including average grain size, grain size distribution, precipitate distribution and crystallographic texture, on the reliability of Al and Al-alloys is well documented. In this paper, the various x-ray methods available for measuring preferred orientation in blanket films are compared and contrasted in an effort to find the fastest, most accurate method to acquire crystallographic texture information. I(111)/I(200) ratios from Bragg-Brentano scans (θ/2θ), rocking curves, and complete pole figures (fiber plots) were compared for four Ti/AlCu films having greatly different crystallographic texture components. The results show that it matters how texture is measured in a thin film; only pole figures (fiber plots) are unambiguous. In addition, the local texture in a series of stress-voided 0.48 um wide Ti/AICuSi/TiN lines was measured using Backscattered Kikuchi Diffraction (BKD). Samples were chosen from two sets of identically prepared wafers (processed at different times) showing large differences in stress-voiding driven resistance versus time behavior. The more strongly textured (111 ) films had decreased stress-voiding lifetimes and tended to have smaller average grain sizes with slightly larger grain size distributions. This is in apparent contradiction with previous results in Al films, where improved stress-voiding and electromigration behavior were found in those films with the strongest (111 ) texture.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable