Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T11:00:29.760Z Has data issue: false hasContentIssue false

Boron Nitride: Composition, Optical Properties, and Mechanical Behavior

Published online by Cambridge University Press:  25 February 2011

John J. Pouch
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, Ohio 44135
Samuel A. Alterovitz
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, Ohio 44135
Kazuhisa Miyoshi
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, Ohio 44135
Joseph O. Warner
Affiliation:
National Aeronautics and Space Administration, Lewis Research Center, Cleveland, Ohio 44135
Get access

Abstract

A low energy ion beam deposition technique was used to grow boron nitride films on quartz, germanium, silicon, gallium arsenide, and indium phosphide. The film structure was amorphous with evidence of a hexagonal phase. The peak boron concentration was 82 at %. The carbon and oxygen Impurities were in the 5 to 8 at % range. Boron-nitrogen and boron-boron bonds were revealed by x-ray photoelectron spectroscopy. The index of refraction varied from 1.65 to 1.67 for films deposited on the III–V compound semiconductors. The coefficient of friction for boron nitride in sliding contact with diamond was less than 0.1. The substrate was silicon.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable