Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T04:49:21.990Z Has data issue: false hasContentIssue false

Breakdown Behavior of Aigan Msm uv Photodetectors

Published online by Cambridge University Press:  10 February 2011

S. Liang
Affiliation:
ECE Department, Rutgers University, Piscataway, NJ 08855-0909,shliang@ece.rutgers.edu
Y. Liu
Affiliation:
ECE Department, Rutgers University, Piscataway, NJ 08855-0909,
Y. Lu
Affiliation:
ECE Department, Rutgers University, Piscataway, NJ 08855-0909,
M. Schurman
Affiliation:
EMCORE Corporation, Somerset, NJ 08873
C. A. Tran
Affiliation:
EMCORE Corporation, Somerset, NJ 08873
I. Ferguson
Affiliation:
EMCORE Corporation, Somerset, NJ 08873
Get access

Abstract

GaN is an attractive wide bandgap semiconductor material for optoelectronic device applications at blue and UV wavelengths. The breakdown behavior of interdigital MSM type of AlGaN UV photodetectors (PDs) are reported here. The A1GaN was deposited using MOCVD technique. The MSM devices were fabricated using undoped AlGaN (Al composition is 0.13) epitaxial layer on sapphire substrate. Au/Ti metallization was patterned as metal electrodes on AlGaN. Very high UV responsivity of the devices was achieved at DC bias voltage in the range of 60–140V depending on the device dimensions. The breakdown voltage exhibits a negative temperature coefficient. The relationship between the breakdown voltage and device dimensions has been investigated using both of I-V, C-V characteristics. It has been found that annealing of the contact modifies the device characteristics, in particular, the breakdown behaviors.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable