Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T18:02:01.540Z Has data issue: false hasContentIssue false

Buckling failure of compressive loaded hard layers in flexible devices

Published online by Cambridge University Press:  01 February 2011

Piet C.P. Bouten
Affiliation:
Philips Research Laboratories, Eindhoven, The Netherlands.
Marcel A.J. van Gils
Affiliation:
Philips Centre for Industrial Technology, Eindhoven, The Netherlands.
Get access

Abstract

Substrate materials for flexible devices are multi-layer composite structures. On top of a base polymer functional inorganic layers such as permeation barriers and conductive layers are applied. Due to the thermal mismatch between polymer and inorganic layer, the layer is compressive loaded at ambient conditions. A characteristic failure mode, occurring with compressive loaded thin layers, is buckling failure. The interface between adjacent layers fails locally, and the thin top layer bends outwards. The buckles have a characteristic width and height. These sizes are used to analyse the compressive strain, present in the layer before failure, and the adhesion quality of the failed interface. A buckle map is introduced to guide this analysis.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable