Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T10:53:13.093Z Has data issue: false hasContentIssue false

Buried Concentration Profiles for Optical Waveguides by One-StepElectro-Diffusion Process: Theoretical Analysis

Published online by Cambridge University Press:  21 February 2011

Xiaoming Li
Affiliation:
R&D, Norton Company, 1 New Bond Street, Worcester, MA 01606
Paul F. Johnson
Affiliation:
New York State College of Ceramics at Alfred University, Alfred, NY 14802
Get access

Introduction

In recent years, a two-step electric field assisted diffusion orion-exchange technique has been extensively studied for producing buriedconcentration profiles in glass [1,2,3], polymer [4,5], electrooptic andsemiconducting [6,7] substrate materials to fabricate buried opticalwaveguide devices. The technique contains two separate diffusion processesand is quite complicated, cost and time consuming. In addition, theoreticalanalysis of the technique is too complicated to be used for calculating andtailoring concentration profiles. Many efforts have been made to pursue aone-step process for producing buried profiles. Very recently, a novelone-step technique [8] involving electric field assisted diffusion of silverions into glass from molten AgNO3 bath with decaying silverconcentration has been developed to produce buried Ag+concentration profiles in glass substrate. The new technique is, from thepractical operation point of view, relatively simple and is a significantimprovement over the conventional two-step process.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable