Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-19T04:42:00.664Z Has data issue: false hasContentIssue false

The Calibration of the Nanoindenter

Published online by Cambridge University Press:  15 February 2011

N J Mccormick
Affiliation:
National Physical Laboratory, Queens Road, Teddington, Middlesex, TW11 0LW, UK
M G Gee
Affiliation:
National Physical Laboratory, Queens Road, Teddington, Middlesex, TW11 0LW, UK
D J Hall
Affiliation:
National Physical Laboratory, Queens Road, Teddington, Middlesex, TW11 0LW, UK
Get access

Extract

The nanoindenter has a tremendous potential for the measurement of mechanical properties of thin films and coatings. Information can be obtained about plastic, elastic and time dependent deformation behaviour. In some cases fracture behaviour of the coatings and the adhesion of the coating to the substrate can also be investigated.

Before accurate and reproducible measurements can be made the nanoindenter needs to be suitably calibrated. The magnitude of the uncertainties associated with calibration and their relevance to measurements are also required. Additionally it is important that a thorough understanding of the effect of thermal drift on the measurement process is developed. Traceability of calibration is also an important consideration.

The primary areas where calibration is essential are displacement, load and shape of the indenter.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable