Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T05:18:08.195Z Has data issue: false hasContentIssue false

Characterization and Optimization of Fluid Flow in a High Biot Number System

Published online by Cambridge University Press:  28 January 2011

Richard Wlezien
Affiliation:
Department of Mechanical Engineering, Tufts University, 200 College Avenue, Medford, MA 02155.
Jason Prapas
Affiliation:
Department of Mechanical Engineering, Tufts University, 200 College Avenue, Medford, MA 02155.
Sarah Briggs
Affiliation:
Department of Mechanical Engineering, Tufts University, 200 College Avenue, Medford, MA 02155.
Marc Hodes
Affiliation:
Department of Mechanical Engineering, Tufts University, 200 College Avenue, Medford, MA 02155.
Vincent Manno
Affiliation:
Department of Mechanical Engineering, Tufts University, 200 College Avenue, Medford, MA 02155.
Douglas Matson
Affiliation:
Department of Mechanical Engineering, Tufts University, 200 College Avenue, Medford, MA 02155.
Luisa Chiesa
Affiliation:
Department of Mechanical Engineering, Tufts University, 200 College Avenue, Medford, MA 02155.
Get access

Abstract

Experiments and analysis have been conducted to characterize flow separators used in applications where heated fluid passes between layers of solid material such as in the manufacturing of gelatinous materials. The Biot number of the configuration is the key parameter, and must be taken into account when optimizing performance. It is shown that most prior work was for low Biot number systems, and the particular configurations under consideration operate at high Biot number. Existing designs developed for lower Biot number (such as membrane filter spacers) are shown to perform poorly for this application. An experimental apparatus was designed and fabricated to quantitatively assess pressure drop through the system using different separation strategies. These results were compared with a simplified two-term model based on the physics of viscous drag in these devices. Channels without separators behave like classical Poiseuille flow. Channels with separators can be modeled with a two-term equation: a baseline Poiseuille term and a form drag term. A variety of separator designs are compared and their overall performance is discussed. We also illustrate the high sensitivity to gap height in all configurations.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable