Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-13T22:38:47.019Z Has data issue: false hasContentIssue false

Characterization for Organic Solid Solution and Formation of Organic Electronics

Published online by Cambridge University Press:  01 February 2011

Yan Shao
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, CA 90095, USA
Yang Yang*
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, CA 90095, USA
*
*Author to whom correspondence should be addressed; e-mail: yangy@ucla.edu.
Get access

Abstract

Recent two decades have seen the rapid development of organic electronics and much attention has been paid to carrier transport behavior. However, other characteristics, such as material compatibility, may be overlooked. We propose a new doping method taking advantage of fused organic solid solution, which is prepared by high-pressure and high temperature processing. In this method, the stable material systems can be selected and high performance organic light-emitting diodes with different colors have been demonstrated.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable