Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T07:18:19.693Z Has data issue: false hasContentIssue false

Characterization of Process Uniformity and Control of Titanium Silicide Formed by Rapid Thermal Processing (RTP)

Published online by Cambridge University Press:  28 February 2011

David Hodul David Hodul
Affiliation:
Varian Research Center, 611 Hansen Way, Palo Alto, CA 94303 Varian Extrion Division, Blackburn Industrial Park, Gloucester, MA 01930
Sandeep Mehta Sandeep Mehta
Affiliation:
Varian Research Center, 611 Hansen Way, Palo Alto, CA 94303 Varian Extrion Division, Blackburn Industrial Park, Gloucester, MA 01930
Get access

Abstract

Sputtered titanium films with thicknesses in the range of 300 to 1200Å were processed in a commercial rapid annealing system to form TiSi2 films. The films were first reacted at low temperatures (500-700°C), etched in ammonia/peroxide solution, and then reacted at 850-900°C to simulate a typical self-alignedsilicide (salicide) process. A method to correctfor dynamic temperature nonuniformities and the resulting etch nonuniformities will be discussed. Sheet resistance maps of the resulting films will be presented. In addition, film properties were measured as a function of annealing ambient in particular, the effects of oxygen contamination were studied.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable