Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T09:06:27.271Z Has data issue: false hasContentIssue false

Characterization of Vapor Deposited, NanoStructured Membranes

Published online by Cambridge University Press:  03 September 2012

Alan F. Jankowski
Affiliation:
Lawrence Livermore National Laboratory, Chemistry & Materials Science, Livermore, CA 94551-9900, U.S.A.
Nerine J. Cherepy
Affiliation:
Lawrence Livermore National Laboratory, Chemistry & Materials Science, Livermore, CA 94551-9900, U.S.A.
James. L. Ferreira
Affiliation:
Lawrence Livermore National Laboratory, Chemistry & Materials Science, Livermore, CA 94551-9900, U.S.A.
Jeffrey P. Hayes
Affiliation:
Lawrence Livermore National Laboratory, Mechanical Engineering Livermore, CA 94551-9900, U.S.A.
Get access

Abstract

The vapor deposition methods of planar magnetron sputtering and electron-beam evaporation are used to synthesize materials with nanostructured morphological features that have ultra-high surface areas with continuous open porosity at the nanoscale. These nanostructured membranes are used in a variety of fuel cells to provide electrode and catalytic functions. Specifically, stand alone and composite nickel electrodes for use in thin film solid-oxide, and molten carbonate fuel cells are formed by sputter deposition and electron beam evaporation, respectively. Also, a potentially high-performance catalyst material for the direct reformation of hydrocarbon fuels at low temperatures is deposited as a nanostructure by the reactive sputtering of a copper-zinc alloy using a partial pressure of oxygen at an elevated substrate temperature.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable