Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T20:30:22.745Z Has data issue: false hasContentIssue false

Chemically Assisted Ion Beam Etching of Tungsten using ClF3

Published online by Cambridge University Press:  28 February 2011

Charles Garner*
Affiliation:
Jet Propulsion Laboratory, California Institute of Technology Pasadena, CA 91109
Get access

Extract

A chemically assisted ion beam etching (CAIBE) technique is described which employs an ion beam from an electron bombardment ion source and a directed flux of ClF3 neutrals. This technique enables the etching of tungsten foils and films in excess of 40 μm thick with good anisotropy and pattern definition over areas 5 mm2, and with a high degree of selectivity. (100) tungsten foils etched with this process exhibit preferred orientation etching, while polycrystalline tungsten films exhibit high etch rates approximately 80% that of (100) orientation tungsten.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable