Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T16:57:00.208Z Has data issue: false hasContentIssue false

Chloride Diffusion in Blended Cement Concrete Made with Quartzite Recycled Aggregate

Published online by Cambridge University Press:  22 November 2012

Claudio J. Zega
Affiliation:
LEMIT, 52 e/121 y 122, (1900) La Plata, ArgentinaCONICET, Argentina
Yury A. Villagrán-Zaccardi
Affiliation:
LEMIT, 52 e/121 y 122, (1900) La Plata, ArgentinaCONICET, Argentina
Ángel A. Di Maio
Affiliation:
LEMIT, 52 e/121 y 122, (1900) La Plata, ArgentinaCONICET, Argentina
Get access

Abstract

Using waste materials as aggregate for new concrete production is a growing tendency, because of several environmental problems. Recycled coarse aggregate (RCA) obtained from crushing waste concrete has lower density and greater absorption than natural aggregate, because of the higher porosity of the mortar attached to the RCA particles. Compressive strength level achieved in recycled concrete may be similar to that of conventional concrete. On the other hand, durable performance of recycled concrete is variable, and diverse evidence can be found in literature for different durability issues. In this paper, chloride ingress in conventional and recycled concrete, made with quartzite aggregate and blended Portland cement is evaluated when immersed in NaCl solution. Two strength levels (21 and 35 MPa) and two contents of RCA (25 and 75%), as substitute of natural quartzite aggregate, were considered. The chloride diffusion coefficient and the relationship between water-soluble chloride and bound chloride are analyzed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable