Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T07:40:44.265Z Has data issue: false hasContentIssue false

Compliant MEMS Motion Characterization by Nanoindentation

Published online by Cambridge University Press:  01 February 2011

Joseph Choueifati
Affiliation:
joseph_choueifati@hotmail.com, USF, Mechanical engineering, 8413 maple flower lane, tampa, FL, 33614, United States
Craig Lusk
Affiliation:
clusk2@eng.usf.edu, University of South Florida, Mechanical Engineering, Tampa, FL, 33620, United States
Xialou Pang
Affiliation:
xiaolupang@gmail.com, University of South Florida, Mechanical Engineering, Tampa, FL, 33620, United States
Alex A. Volinsky
Affiliation:
volinsky@eng.usf.edu, University of South Florida, Mechanical Engineering, Tampa, FL, 33620, United States
Get access

Abstract

Large out-of-plane displacements can be achieved when compliant mechanisms are utilized in MEMS. While mathematical and macroscopic modeling is helpful in building original designs, the actual MEMS device motion needs to be characterized in terms of the forces and displacements. A nanoindentation apparatus equipped with Berkovich diamond tip was used in an attempt to actuate and characterize the motion of the Bistable Spherical Compliant Micromechanism with a nonlinear (approximately cubic) mechanical response. Based on the obtained lateral force-displacement data it was concluded that the Berkovich diamond tip was too sharp, thus cutting through the polysilicon material of the MEMS device.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable