Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-15T20:57:59.984Z Has data issue: false hasContentIssue false
  • English
  • Français

Computer Modeling and Numerical Techniques for Quantifying Microwave Interactions with Materials

Published online by Cambridge University Press:  28 February 2011

Magdy F. Iskander
Magdy F. Iskander*
Affiliation:
University of Utah, Department of Electrical Engineering, Salt Lake City, Utah, 84112
Get access

Abstract

Computer modeling and numerical techniques provide an attractive, accurate, fast, and cost-effective means for calculating power deposition patterns and temperature distributions in materials during and after their processing using microwaves. Besides giving information on heating rates and patterns, numerical modeling and computational techniques may provide valuable information that may result in better control and optimization of theheating process. The optimum material/insulation combination for improved uniformity and efficiency of microwave sintering of ceramics and the development of procedures that may prevent problems such as temperature runaways are typical examples of attainable benefits from numerical modeling and computational techniques.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 189: Symposium L – Microwave Processing of Materials II , 1990, 149
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Sutton, W. H., “Microwave Processing of Ceramic Materials,” Ceramic Bulletin, 68 (2), 376–286 (1989).Google Scholar
2. Sutton, W. H., Brooks, M. H., and Chabinsky, I. J., “Microwave Processing of Materials,” Mat. Res. Soc. Symp. Proc., 124, (1988).Google Scholar
3. Chen, K. M. and Guru, B. S., “Internal EM Field and Absorbed Power Density in Human Torsos Induced by 1-500 MHz EM Waves,” IEEE Trans. Mic Theory and Tech. MTT–26, 746–755 (1977).Google Scholar
4. Massoudi, H., Durney, C. H., and Iskander, M. F., “Comparison of the Absorption Characteristics of Block and Prolate Spheroidal Models of Man Exposed to Near Fields of Short Electric Dipoles,” IEEE Proc., 1086–1087 (1981).Google Scholar
5. Schaubert, D. H., Wilton, D. R., and Glisson, A. W., “A Tetrahedral Modeling Method of Electromagnetic Scattering by Arbitrarily Shaped Inhomogeneous Bodies,” IEEE Trans. Ant. and Prop. AP–32, 75–85 (1984).Google Scholar
6. Tsai, C. T., Massoudi, H., Durney, C. H., and Iskander, M. F., “A Procedure for Calculating Fields Inside Arbitrarily Shaped, Inhomogeneous Dielectric Bodies Using Linear Basis Functions with the Moment Method,” IEEE Trans. Mic. Theory and Tech. MTT–34, 1131–1139 (1986).Google Scholar
7. Hagmann, M. J., Gandhi, O. P., and Durney, C. H., “Numerical Calculations of Electromagnetic Energy Deposition for Realistic Model of Man,” IEEE Trans. Mic. Theory and Tech. MTT–27, 804–809 (1979).Google Scholar
8. Iskander, M. F., “Medical and Biological Applications of Electromagnetic Techniques -- A Relevant to the Microwave Processing of Materials Research,” in Microwave Processing of Materials, edited by Sutton, W. H., Brooks, M. H., and Chabinsky, I. J. (Materials Research Society, 24, 1988).Google Scholar
9. Iskander, M. F., Chen, H. Y., and Penner, J. E., “Optical Scattering and Absorption by Branched Chains of Aerosols,” App. Opt. 28 (15), 3083–3091 (1989).Google Scholar
10. Chen, H. Y., Iskander, M. F., and Penner, J. E., “Light Scattering and Absorption by Fractal Agglomerates and Coagulations of Smoke Aerosols, J. Mod. Opt. 37, 171–181 (1990).Google Scholar
11. Massoudi, H., Durney, C. H., and Iskander, M. F., “Limitations of the Cubical Block Model of Man in Calculating SAR Distribution,” IEEE Trans. Mic. Theory and Tech. MTT–32, 746–752 (1984).Google Scholar
12. Harrington, R. F., Field Computation by Moment Method (McGraw Hill, New York, 1968).Google Scholar
13. Iskander, M. F., Morrison, M. D., Datwyler, W. C., and Hamilton, M. S., “A New Course on Computational Methods in Electromagnetics,” IEEE. Trans. Educ. 31, 101–115 (1988).Google Scholar
14. Iskander, M. F., Chen, H. Y., and Penner, J. E., “Resonance Optical Absorption by Fractal Agglomerates of Smoke Aerosols,” Int. J. Atmos. Env., accepted for publication June 1990.Google Scholar
15. Rao, S. M., Wilton, D. R., and Glisson, A. W., “Electromagnetic Scattering by Surfaces of Arbitrary Shape,” IEEE Trans. Ant. and Prop. AP–30, 409–418 (1982).Google Scholar
16. Morgan, M. A., ed., Finite-Element and Finite-Difference Methods in Electromagnetics Scattering, (Elsevier, New York, 1990).Google Scholar
17. Taflove, A., “Review of the Formulation and Application of the Finite-Difference Time- Domain Method of Numerical Modeling of Electromagnetic Wave Interactions,” Wave Motion 10, 547–582 (1988).Google Scholar
18. Yee, K. S., “Numerical Solution of Initial Boundary Value Problems Involving Maxwell's Equations in Isotropic Media,” IEEE Trans. Ant. and Prop. AP–14, 302–307 (1966).Google Scholar
19. Muir, G., “Absorbing Boundary Conditions for the Finite-Difference Approximation of the Time-Domain Electromagnetic Field Equations,” IEEE Trans. EM Compat. EMC–23, 377–382 (1981).Google Scholar
20. Choi, D. H. and Hoefer, W. J., “The Finite-Difference Time-Domain Method and Its Application to Eigenvalue Problems,” IEEE Trans. Mic. Theory and Tech. MTT–34, 1464–1470 (1986).Google Scholar
21. Iskander, M. F., “Computer Modeling and Numerical Techniques for Quantifying Microwave Interactions with Materials,” presented at the 1990 MRS Spring Meeting, San Francisco, CA, 1990 (unpublished).Google Scholar
22. Kimrey, H. D., Janney, M. A., and Kiggans, J. O., “Microwave Sintering of Zirconia Toughened Alumina Ceramics,” presented at the 1990 MRS Spring Meeting, San Francisco, CA, 1990 (unpublished).Google Scholar
23. Iskander, M. F. and Khoshdel-Milani, O., “Numerical Calculations of the Temperature Distribution in Cross Sections of the Human Body,” Int. J. Rad. One., Biol. Phys. 10, 1907–1912 (1984).Google Scholar
24. Joo, K. and Iskander, M. F., “A New Procedure of Point-Matching Method for Calculating the Absorption and Scattering of Lossy Dielectric Objects,” IEEE Trans. Ant. and Prop. AP–23, (1990).Google Scholar
25. Iskander, M. F., Lakhtakia, A., and Durney, C. H., “A New Procedure for Improving the Solution Stability and Extending the Frequency Range of EBCM,” IEEE Trans. Ant. and Prop. AP–31, 317–324 (1983).Google Scholar
26. Morese, P. M. and Feshbach, H., Methods of Theoretical Physics (McGraw Hill, New York, 1953).Google Scholar
27. Lakhtakia, A. and Iskander, M. F., “Scattering and Absorption of Lossy Dielectric Objects Irradiated by Near Fields of Aperture Sources,” IEEE Trans. Ant. and Prop. AP–31, 111–120 (1983).Google Scholar
28. Lakhtakia, A., Iskander, M. F., Durney, C. H., and Massoudi, H., “Absorption Characteristics of Prolate Spheroidal Models Exposed to the Near Fields of Electrically Small Apertures,” IEEE Trans. Biomed. Eng. BME–29 269–278 (1982).Google Scholar
29. Wissler, E. H., The Use of Finite-Difference Techniques in Simulating the Human Thermal System. Physiological and Behavioral Temperature Regulation, edited by Hardy, J. D., Gagge, A. P., and Stolwijk, J. A. J. (C. C. Thomas, Springfield, Illinois, 1970).Google Scholar