Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T02:21:19.251Z Has data issue: false hasContentIssue false

Copper-Based Ohmic Contacts For The SiGe/Si Heterojunction Bipolar Transistor (HBT) Structure

Published online by Cambridge University Press:  10 February 2011

K. Das
Affiliation:
Department of Electrical Engineering, Tuskegee University, Tuskegee, AL 36088
S. A. Alterovitz
Affiliation:
NASA Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135
Get access

Abstract

A Cu-based metallization scheme has been studied for establishing low resistance contacts for a Si/SiGe/Si heterojunction bipolar transistor (HBT) structure. As-grown doped layers were further implanted with BF2 and As ions for the p-type base and n-type emitter layers, respectively, in order to produce a low sheet resistance surface layer. Contacts were metallized using an e-beam deposited multilayer structure of Ti/Cu/Ti/Al. Specific contact resistances of the order of 10−7 Ω cm2 or lower were obtained.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable