Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T08:26:07.249Z Has data issue: false hasContentIssue false

Deformation behavior and strain rate sensitivity of nanostructured materials at moderate temperatures

Published online by Cambridge University Press:  01 February 2011

Cécilie Duhamel
Affiliation:
Centre d'Etude de Chimie Métallurgique (CECM-CNRS, UPR 2801) 15 rue Georges Urbain, 94407 Vitry-sur-Seine, France.
Sandrine Guérin
Affiliation:
Centre d'Etude de Chimie Métallurgique (CECM-CNRS, UPR 2801) 15 rue Georges Urbain, 94407 Vitry-sur-Seine, France.
Martin Hÿtch
Affiliation:
Centre d'Etude de Chimie Métallurgique (CECM-CNRS, UPR 2801) 15 rue Georges Urbain, 94407 Vitry-sur-Seine, France.
Yannick Champion
Affiliation:
Centre d'Etude de Chimie Métallurgique (CECM-CNRS, UPR 2801) 15 rue Georges Urbain, 94407 Vitry-sur-Seine, France.
Get access

Abstract

Strain-rate jump tests in compression are carried out on nanostructured copper (grain size = 90 nm) at moderate temperatures (353K - 393K). Strain-rate sensitivity m is measured as a function of temperature, T, and strain rate, έ. Increasing temperature or decreasing strain rate induces an increase in the strain-rate sensitivity. For (έ, T) = (1×10-5 s-1, 393K), m is equal to 0.17 which is the highest value reported for nanocrystalline copper. These results of enhanced m are encouraging in terms of gain in ductility. The measurements emphasize the existence of a thermally activated mechanism different from the normal rate-controlling process observed for microcrystalline fcc metals.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable