No CrossRef data available.
Article contents
Demonstration of a System Performance Assessment Process
Published online by Cambridge University Press: 28 February 2011
Abstract
To help evaluate the concept of nuclear fuel waste disposal in plutonic rock of the Canadian Shield, the long-term performance of a hypothetical disposal facility is being studied. This case study uses information from a Shield research area, laboratories, and conceptual engineering. It illustrates the use of performance assessment to derive constraints on the siting, construction, and operation of a disposal facility, and to demonstrate the feasibility of safe disposal of nuclear fuel waste.
Information
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1991
References
REFERENCES
1.
AECB (Atomic Energy Control Board): “Regulatory Objectives, Requirements and Guidelines for the Disposal of Radioactive Wastes -Long-Term Aspects,” Atomic Energy Control Board Regulatory Document, R-104, 1987.Google Scholar
2.
Baumgartner, P. and Simmons, G.R.: “Disposal Centre Engineering for the Canadian Nuclear fuel Waste Management Program,” Radioactive Waste Management and the Nuclear Fuel Cycle
1987, Vol. 8(2–3), pp. 219–239.Google Scholar
3.
Davison, C.C., Chan, T. and Scheier, N.W.: “Experimental Activities of the Canadian Nuclear Fuel Waste Management Program to Validate Geosphere Models,” Proc. GEOVAL-87, A Symposium on Verification and Validation of Geosphere Performance Assessment Models, Stockholm, Sweden, April 7-9, 1987.Google Scholar
5.
Zach, R. and Sheppard, S.C.: “The Food-Chain and Dose Submodel CALDOS for the Assessment of Canada’s Nuclear Fuel Waste Management Concept,” Atomic Energy of Canada Limited Report, in preparation.Google Scholar
6. International Commission On Radiological Protection, Report of the Task Group On Reference Man, ICRP Publication 23, Pergamon Press, Oxford, 1975.Google Scholar
7.
Goodwin, B.W., Stephens, M.E., Davison, C.C., Johnson, L.H. and Zach, R.: “Scenario Analysis for the Postclosure Assessment of the Canadian Concept of Nuclear Fuel Waste Disposal,” Atomic Energy of Canada Limited Report, in preparation.Google Scholar
8.
Dormuth, K.W. and Sherman, G.R.: “SYVAC - A Computer Program for Assessment of Nuclear Fuel Waste Management Systems, Incorporating Parameter Variabilty,” Atomic Energy of Canada Limited Report, AECL-6814, 1981.Google Scholar
9.
Goodwin, B.W., Andres, T.H., Davis, P.A., LeNeveu, D.M., Melnyk, T.W., Sherman, G.R. and Wuschke, D.M.: “Post-Closure Environmental Assessment for the Canadian Nuclear Fuel Waste Management Program,” Radioactive Waste Management and the Nuclear Fuel Cycle
1987, Vol. 8(2–3), pp. 241–272.Google Scholar
10.
Garisto, N.C. and LeNeveu, D.M.: “The Vault Model for the Disposal of Used CANDU Fuel: Documentation and Analysis of Scoping Calculations,” Atomic Energy of Canada Limited Report, AECL-9578, 1989.Google Scholar
11.
Davison, C.C., Chan, T., Melnyk, T.W., Vandergraaf, T.T. and Kamenini, D.C.: “The Geosphere Model for Postclosure Assessment of Canada’s Nuclear Fuel Waste Management Concept,” Atomic Energy of Canada Limited Report, in preparation.Google Scholar
12.
Davis, P.A., Zach, R., Stephens, M.E., Amiro, B.D., Bird, G.A., Corbett, R.J., Reid, J.A.k., Sheppard, M.I., Sheppard, S.C. and Stephenson, M.: “The Biosphere Model for Postclosure Assessment of Canada’s Nuclear Fuel Waste Management Concept,” Atomic Energy of Canada Limited Report, in preparation.Google Scholar
13.
Chan, T., Goodwin, B.W., LeNeveu, D.M., Melnyk, T.W., Wikjord, A.G.: Private communication.Google Scholar