Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T03:55:02.024Z Has data issue: false hasContentIssue false

The Detection And Mapping Of Defects In Organic Coatings Using Local Electrochemical Impedance Methods

Published online by Cambridge University Press:  10 February 2011

S. R. Taylor
Affiliation:
Center for Electrochemical Science and Engineering, Dept. of Materials Science, University of Virginia, Charlottesville, VA 22903, srt6p@uva.pcmail.virginia.edu
M. W. Wittmann
Affiliation:
Center for Electrochemical Science and Engineering, Dept. of Materials Science, University of Virginia, Charlottesville, VA 22903, srt6p@uva.pcmail.virginia.edu
Get access

Abstract

Coating failure initiates as a local event at defects which can result from chemical heterogeneities in the resin or physical defects such as bubbles, underfilm deposits, or pinholes. The ability to detect, map the location, as well as make quantitative in-situ measurements of coating heterogeneities will help identify the source of failure (i.e. coating chemistry, method of application, cure schedule, etc.) and provide insight into the mechanisms of coating degradation. This study used a 5 electrode arrangement to perform local electrochemical impedance spectroscopy (LEIS) on coated steel substrates. Using single frequency measurements, LEIS could successfully detect and map both intentional chemical heterogeneities and physical defects such as subsurface bubbles, underfilm deposits, and pinholes. Efforts to optimize probe design and instrumentation are ongoing.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable