Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-18T03:08:21.364Z Has data issue: false hasContentIssue false

Developing Biosensors for Monitoring Orthopedic Tissue Growth

Published online by Cambridge University Press:  01 February 2011

Sirinrath Sirivisoot
Affiliation:
sirinrath@brown.edu, Brown University, Engineering, 182 Hope Street, Box D,, Brown University, Providence, RI, 02912, United States, 4014407251
Chang Yao
Affiliation:
Chang_Yao@brown.edu, Brown University, Division of Engineering, Providence, RI, 02912, United States
Xingcheng Xiao
Affiliation:
xingcheng.xiao@gm.com, Brown University, Division of Engineering, Providence, RI, 02912, United States
Brian W. Sheldon
Affiliation:
Brian_Sheldon@brown.edu, Brown University, Division of Engineering, Providence, RI, 02912, United States
Thomas J. Webster
Affiliation:
Thomas_webster@brown.edu, Brown University, Division of Engineering, Providence, RI, 02912, United States
Get access

Abstract

The objective of this in vitro present study was to create a biosensor which can monitor in situ orthopedic tissue growth juxtaposed to a newly implanted orthopedic material. This biosensor has unique properties including the ability to sense, detect, and control bone regrowth. Such a biosensor is useful not only in regenerating tissue necessary for orthopedic implant success, but also to aid in informing an orthopedic surgeon whether sufficient new bone growth occurred. If the sensor determines that insufficient new bone growth occurred, the sensor can also act in an intelligent manner to release bone growth factors to increase bone formation. The primary biomaterial in this biosensor is anodized Ti, developed by chemical etching and passivation treatments. Carbon nanotubes (CNTs), because of their electrical and mechanical properties, are essential to consider when designing such biosensors since they will be used to apply and measure conductivity changes as new bone grows next to the implant. For this, parallel multiwall CNTs were grown from the pores of the anodized Ti by a chemical vapor deposition process. Lastly, these sensors will be composed of a conductive, biodegradable, polymer layer that degrades when bone grows and, consequently, undergoes a change in conductivity that can be measured by the CNTs grown out of the anodized Ti. This conductive, biodegradable polymer consists of polypyrrole (which is conductive) and poly-lactic-co-glycolic acid (which is biodegradable). Preliminary in vitro results suggest that osteoblast functions (specifically alkaline phosphatase activity and calcium deposition) on CNTs grown on anodized Ti are significantly enhanced when compared to anodized Ti and currently-used Ti; thus, it is anticipated that bone growth could be enhanced on these novel biomaterial sensors.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable