Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T06:44:15.517Z Has data issue: false hasContentIssue false

The Development and Testing of Synroc C as a High Level Nuclear Waste Form

Published online by Cambridge University Press:  15 February 2011

K.D. Reeve
Affiliation:
Australian Atomic Energy Commission Research Establishment, Sutherland NSW 2232 Australia
D.M. Levins
Affiliation:
Australian Atomic Energy Commission Research Establishment, Sutherland NSW 2232 Australia
E.J. Ramm
Affiliation:
Australian Atomic Energy Commission Research Establishment, Sutherland NSW 2232 Australia
J.L. Woolfrey
Affiliation:
Australian Atomic Energy Commission Research Establishment, Sutherland NSW 2232 Australia
W.J. Buykx
Affiliation:
Australian Atomic Energy Commission Research Establishment, Sutherland NSW 2232 Australia
Get access

Abstract

The current status of SYNROC C research and development by the Australian Atomic Energy Commission is reviewed. A non-radioactive fabrication demonstration line designed to produce 10 cm o.d., 90 cm long, cylinders of SYNROC canned in stainless steel by the method of in-can hot pressing is being commissioned. Leach tests are proving the excellent leach resistance of SYNROC. Accelerated radiation damage testing using fast neutrons has simulated storage times of up to 6.7×105 years. Thermophysical properties of SYNROC have been measured over the temperature range 20–650°C.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable