Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T16:04:27.359Z Has data issue: false hasContentIssue false

Development of A 4H-SiC CMOS Inverter

Published online by Cambridge University Press:  01 February 2011

Brett Adam Hull
Affiliation:
brett_hull@cree.com, Cree, Inc., Power Device R&D, 4600 Silicon Dr., Durham, NC, 27703, United States, 919-313-5440, 919-313-5696
Sei-Hyung Ryu
Affiliation:
sei-hyung_ryu@cree.com, Cree, Inc., Durham, NC, 27703, United States
Husna Fatima
Affiliation:
fatima_husna@cree.com, Cree, Inc., Durham, NC, 27703, United States
Jim Richmond
Affiliation:
jim_richmond@cree.com, Cree, Inc., Durham, NC, 27703, United States
John W. Palmour
Affiliation:
john_palmour@cree.com, Cree, Inc., Durham, NC, 27703, United States
James Scofield
Affiliation:
james.scofield@wpafb.af.mil, Air Force Research Laboratory, Wright-Patterson AFB, OH, 45433, United States
Get access

Abstract

In this paper we report the first 4H-SiC CMOS inverter, which was designed to be integrated in the process flow of a 4H-SiC power DMOSFET. The channels of both of the n channel and p-channel MOSFETs of the inverter were 50 um wide by 3 um long. NMOSFET threshold voltage (VTH) ranged from 4.4 V at 25°C to 2.2 V at 250°C and PMOSFET VTH ranged from -4.75 V at 25°C to just under -4 V at 300°C. The transfer threshold voltage (Vm) of the 4H-SiC CMOS inverter was in a very tight range of 2.8 V to 2.9 V over the entire temperature range of 25°C to 300°C when using a drive voltage (VDD) of 10 V.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable