Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-19T06:53:40.656Z Has data issue: false hasContentIssue false

Domain Structures and Current-Controlled Switching Characteristics of Micron Sized Permalloy Structures with Varying Aspect Ratio

Published online by Cambridge University Press:  01 February 2011

S. C. Seah
Affiliation:
g0500074@nus.edu.sg, National University of Singapore, Information Storage Materials Laboratory, Department of Electrical & Computer Engineering, 4 Engineering Drive 3, Singapore 117576, Singapore, N/A, N/A, Singapore
Y S Soh
Affiliation:
g0402641@nus.edu.sg, National University of Singapore, Information Storage Materials Laboratory, Department of Electrical & Computer Engineering, 4 Engineering Drive 3, Singapore 117576, Singapore, N/A, N/A, Singapore
V Ng
Affiliation:
elengv@nus.edu.sg, National University of Singapore, Information Storage Materials Laboratory, Department of Electrical & Computer Engineering, 4 Engineering Drive 3, Singapore 117576, Singapore, N/A, N/A, Singapore
Get access

Abstract

Permalloy magnetic structures were fabricated using electron beam lithography and then deposited by evaporation followed by lift-off. The structures were studied for their magnetic domain properties with respect to their aspect ratio. Instead of conventional switching using a magnetic field, a current carrying conductor was used to switch the structures. The current value was gradually increased and magnetic force microscopy was used to study the domain changes of the remanent structures after every increment. At the same time, simulation is done using object-oriented micro-magnetic framework to compare with the experimental results.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable