Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T16:26:57.641Z Has data issue: false hasContentIssue false

Dry Surface Cleaning of Plasma-Etched Hemts

Published online by Cambridge University Press:  22 February 2011

S. J. Pearton
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ
F. Ren
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ
A. Katz
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ
U. K. Chakrabarti
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ
E. Lane
Affiliation:
AT&T Bell Laboratories, Breinigsville, PA
W. S. Hobson
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ
R. F. Kopf
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ
C. R. Abernathy
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ
C. S. Wu
Affiliation:
Hughes Aircraft Co., Torrance, CA
D. A. Bohling
Affiliation:
Air Products and Chemicals Inc., Allentown, PA
J. C. Ivankovits
Affiliation:
Air Products and Chemicals Inc., Allentown, PA
Get access

Abstract

Fabrication of sub-micron high electron mobility transistors (HEMTs) involves dry etch removal of GaAs from an underlying AlGaAs or InGaAs stop layer. The etch selectivity is achieved by formation of AlF3 on AlGaAs, or InCl3 and InF3 on InGaAs, which must be removed before processing can proceed. Wet chemical cleaning has difficulty in such a situation because of surface tension effects. We have investigated use of Electron Cyclotron Resonance (ECR) H2 or Ar discharges, or hexafluoroacetylacetone (HFAC) vapor, for in-situ dry etch cleaning of HEMTs exposed to low bias BCl3/SF6 discharges. The HFAC vapor can remove most of the remnant fluorine, but is effective only when the sample is heated above ∼250°C. This relatively high temperature is not compatible with in-situ cleaning of the etched device. Low-bias(−75V) sputter cleaning with an Ar discharge removes all remnant Cl and ∼40% of the F, but dc biases above -125V are required for complete cleaning, and this ion bombardment can lead to damage in the HEMT. ECR H2 discharge exposure is effective in removing all Cl- and F-related residues in a short period (∼5 mins) with low dc biases (−25 V) on the sample.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable