Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T18:14:50.011Z Has data issue: false hasContentIssue false

Drying Mechanics of Gels

Published online by Cambridge University Press:  28 February 2011

George W. Scherer*
Affiliation:
E. I. du Pont de Nemours & Co., Central R & D Dept., Experimental Station 356/384, Wilmington, DE 19898 USA
Get access

Abstract

A model is presented for the stresses and strains that develop in a gel during drying. The driving force for shrinkage is assumed to be the interfacial energy, and the gel is considered to be viscoelastic. The liquid seeks to flow into the dry region of a gel in order to replace the solid-vapor interface with a solid-liquid interface having lower specific energy. This creates a “redistribution pressure” that causes the wet region to contract. The free contraction rate can be calculated by equating the decrease in surface energy with the energy dissipated in viscous flow as the gel contracts. The permeability of the gel to the liquid in the pores is especially important in the early stages of drying, and may control the contraction rate. The model allows quantitative predictions of contraction rate and stress during drying. In this paper, the model is applied to a plate drying from both sides.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable