Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T17:30:20.050Z Has data issue: false hasContentIssue false

Early Detection of the Metallization Quality Using Moderately Accelerated Electromigration Stress Conditions

Published online by Cambridge University Press:  10 February 2011

A. Scorzoni
Affiliation:
CNR - Istituto LAMEL, via P. Gobetti 101, 40129 Bologna, Italy, scorzoni@area.bo.cnr.it
I. De Munari
Affiliation:
MTI, Universitá di Parma, v.le delle Scienze, 43100 Parma, Italy
M. Impronta
Affiliation:
CNR - Istituto LAMEL, via P. Gobetti 101, 40129 Bologna, Italy, scorzoni@area.bo.cnr.it
R. Balboni
Affiliation:
CNR - Istituto LAMEL, via P. Gobetti 101, 40129 Bologna, Italy, scorzoni@area.bo.cnr.it
N. Kelaidis
Affiliation:
CNR - Istituto LAMEL, via P. Gobetti 101, 40129 Bologna, Italy, scorzoni@area.bo.cnr.itNCSR Demokritos - Inst. of Microelectronics, 153 10 Aghia Paraskevi Attikis, Athens, Greece
S. Foley
Affiliation:
NMRC, University College, Lee Maltings, Prospect row, Cork, Ireland
M. Forde
Affiliation:
NMRC, University College, Lee Maltings, Prospect row, Cork, Ireland
Get access

Abstract

In this work we use a wafer-level, High Resolution Resistance Measuring Technique (HRRMT) to detect fabrication faults of Al-Cu interconnections. Experiments have been performed on two distinct sets of metal lines. The first set includes two lots of 4 μm wide lines which, once tested at moderately accelerated stress conditions, gave largely different life times. A microstructural analysis confirmed a major defectivity of the lot with shorter life time. An accurate examination of the early resistance variations revealed the presence of two distinct and subsequent phases, namely an initial pseudo-parabolic resistance increase followed by a linear resistance drop. Significant differences between the resistance behaviour of the two lots were detected during the first stage, lasting a few hours. Measurable differences could even be detected in the first few minutes. A second group of experiments was launched in order to assess the capability of HRRMT as in-line monitors. Samples from four wafers, one reference wafer and three wafers with intentional process variations, have been tested using our HRRMT at constant temperature and current, simulating an in-line production test. The standard life time of the four wafers have also been collected. Preliminary measurements highlight that a change of life time due to process variation corresponds to changes of the resistance behaviour in the first hours of test. These results pave the way for a new application of high resolution methods to assess the quality of a metallization system in a reasonable amount of time.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable