Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T02:10:57.118Z Has data issue: false hasContentIssue false

Early yielding and stress recovery in (111) and (100) texture components in Cu thin films determined using synchrotron x-ray diffraction

Published online by Cambridge University Press:  01 February 2011

D. E. Nowak
Affiliation:
Cornell University, Department of Materials Science and Engineering, Bard Hall, Ithaca, NY 14853, U.S.A.
S. P. Baker
Affiliation:
Cornell University, Department of Materials Science and Engineering, Bard Hall, Ithaca, NY 14853, U.S.A.
Get access

Abstract

Synchrotron x-ray diffraction experiments were used to study the thermomechanical behavior of individual texture components in passivated Cu thin films. Films were deposited to a thickness of 500 nm on SiNx barrier layers on Si substrates and then passivated with SiNx. The films were highly textured with grains having (111) or (100) planes parallel to the plane of the film. In-plane film stresses were determined separately in the two texture components as a function of temperature during thermal cycles and also during isothermal holds at 140°C. The results are compared to models of yield behavior and anelastic recovery.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable