Hostname: page-component-7b7567c8c-x2lbt Total loading time: 0 Render date: 2026-11-15T23:21:26.096Z Has data issue: false hasContentIssue false

The Effect of Grain Boundaries on Surface Diffusion Mediated-Planarization of Polycrystalline Cu Films

Published online by Cambridge University Press:  15 February 2011

R.A. Brain
Affiliation:
Thomas J. Watson Laboratory of Applied Physics California Institute of Technology, Pasadena, CA 91125.
D.S. Gardner
Affiliation:
Components Research, Intel Corporation, Santa Clara, CA 95052.
D.B. Fraser
Affiliation:
Components Research, Intel Corporation, Santa Clara, CA 95052.
H.A. Atwater
Affiliation:
Thomas J. Watson Laboratory of Applied Physics California Institute of Technology, Pasadena, CA 91125.
Get access

Abstract

In situ, ultrahigh vacuum anneals were performed to induce Cu reflow at 500°C following deposition of Cu films and a Ta barrier layer on 1 μm wide by 1 μm deep trenches. Transmission electron micrograph cross-sections show profiles which suggest that grain boundaries and surface energy anisotropy significantly affect reflow. The extent of reflow is dependent on the structure of grain boundary-surface intersections, and the surface profile consists of regions of low curvature within grains and with sharp discontinuities in curvature at grain boundaries, a structure that inhibits surface diffusion. We present results showing how the surface diffusion mediated reflow varies with grain boundary groove angle and position, and compare these results with finite-element simulations that model surface diffusion-driven reflow.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable