Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T10:46:48.134Z Has data issue: false hasContentIssue false

Effect of network structure from different processing conditions on the mechanical property of semi-crystalline polymers

Published online by Cambridge University Press:  11 June 2014

Xin Dong
Affiliation:
School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
David McDowell
Affiliation:
School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USAG. W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
Karl Jacob
Affiliation:
School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USAG. W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
Get access

Abstract

Semi-crystalline structures were prepared from different processing condition. Biaxial oriented melt were crystallized at 375 K and atmospheric pressure for 10 nanoseconds (ns), to generate a lamellar semi-crystalline structure. Similar structures were also prepared from deformation of a cubic amorphous initial structure isothermally at 375 K. For comparison, two different thermostats, the constant stress (NPT) and constant volume (NVT) conditions were applied to the system during 10 ns of crystallization. The semi-crystalline samples shared common morphological features such as in the crystallinity, crystal orientation, lamellae thickness and density distribution, etc. However, during the subsequent uniaxial tensile deformation test of the samples to strain of 0.5, different stress-strain behaviors were demonstrated. By combining the observations of morphologies during deformation tests and analysis of the stress-strain curves, conclusions were made that the effectiveness of the network had a strong influence on the mechanical property and strain hardening behavior. The oriented network from the constant stress crystallization, owing to the taut chains, gave rise to optimal mechanical response with substantial strain-hardening.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable