Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T07:40:10.648Z Has data issue: false hasContentIssue false

The effect of pH on chlorite dissolution rates at 25°C

Published online by Cambridge University Press:  11 February 2011

Åsa B. Gustafsson
Affiliation:
Royal Institute of Technology, Inorganic Chemistry, Stockholm, Sweden
Ignasi Puigdomenech
Affiliation:
Swedish Nuclear Fuel & Waste Management Co., Stockholm, Sweden.
Get access

Abstract

The Swedish nuclear industry is planing to dispose spent nuclear fuel encapsulated in copper canisters in granitic bedrock at a depth of approx. 500 m. The reducing capacity of the geo-sphere is important for canister corrosion and radionuclide migration. The main inorganic reduc-tants are Fe(II)-containing minerals: biotite in the bedrock, and pyrite and chlorite in the fracture filling minerals as well as in the buffer and backfill. As a consequence, the dissolution of chlorite is an important parameter when considering the reducing capacity available to groundwaters around the repository.

The weathering rates of a chlorite sample from Taberg in central Sweden has been studied in 0.01 M NaCl media at (25±1)°C in the pH region 2–12. The chlorite was characterized before and after grinding and sieving, and was found to have a relatively low Fe-content, with the formula (Mg9.44 FeII 0.72Al1.68)(Si6.47Al1.4FeIII 0.13)O20(OH)16. Kinetic experiments were performed using a thin-film continuous flow-through technique with flow rates of 5 mL/h or 2.7 mL/h. This technique prevents the precipitation of secondary phases such as iron(III) hydroxides. Solution samples were taken after a reaction time of 0–30 days. The contents of released Al, Fe, Mg and Si were analyzed using an Inductively Coupled Plasma emission spectroscopy (ICP-AES) technique and then normalized to the Brunauer-Emmet-Teller (BET) surface area and flow-rate in order to obtain rates of dissolution. The dissolution rate of the chlorite studied was pH-dependent, and a minimum was observed in the neutral pH region. The dissolution rate (based on Si data) decreased from 7×10-11 mol/(m2 s) at pH=2 to 4×10-13 mol/(m2 s) at pH≈7 and then in-creased to 3×10-12 mol(m2 s) at pH=12.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable