Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T08:16:07.756Z Has data issue: false hasContentIssue false

Effect of Synthesis Conditions on Phase Composition of Pyrochlore-Brannerite Ceramics

Published online by Cambridge University Press:  21 March 2011

S.V. Stefanovsky
Affiliation:
SIA “Radon”, 7th Rostovskii per., 2/14, Moscow 119121 Russia, Email: itbstef@cityline.ru
S.V. Yudintsev
Affiliation:
Institute of Geology of Ore Deposits RAS, Staromonetnii 35, Moscow 109035, Russia
B.S. Nikonov
Affiliation:
Institute of Geology of Ore Deposits RAS, Staromonetnii 35, Moscow 109035, Russia
M.I. Lapina
Affiliation:
Institute of Geology of Ore Deposits RAS, Staromonetnii 35, Moscow 109035, Russia
A.S. Aloy
Affiliation:
V.G. Khlopin Radium Institute, 2nd Murinskii pr. St-Petersburg, Russia
Get access

Abstract

Three melted samples of pyrochlore-brannerite-based ceramics produced under different redox conditions were examined. Two of the samples were produced using cold crucible melting at ~1600 C. The third sample was obtained via melting in a microwave oven at 1700-1800 C. All the samples are composed of major pyrochlore and brannerite phases, and minor rutile and UO2-based solid solution or pseudobrookite phases. Pyrochlore-structured phases predominate in all three samples and account for 50-60% of the total bulk. Two pyrochlore varieties – Ca-pyrochlore (predominant) and Ba-pyrochlore have been found in these samples. The latter phase is more stable at high temperatures than the Ba-hollandite present in sintered pyrochlore-rich Synroc-F ceramics. Decomposition of the Ba-hollandite results in rutile formation in the melted samples.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable