Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T11:47:03.642Z Has data issue: false hasContentIssue false

Electrochemical Deposition of Bismuth Micro- and Nanowires Using Electroplate and Lift Lithography

Published online by Cambridge University Press:  15 January 2013

Timea Hohl
Affiliation:
University of Wisconsin – Stevens Point, WI 54481, U.S.A.University of Debrecen, Debrecen, H-4010, Hungary
Lori A. Lepak
Affiliation:
University of Wisconsin – Stevens Point, WI 54481, U.S.A.
Andrew Zimmerman
Affiliation:
University of Wisconsin – Stevens Point, WI 54481, U.S.A.
Samuel Hempel
Affiliation:
University of Wisconsin – Stevens Point, WI 54481, U.S.A.
Anirudha V. Sumant
Affiliation:
Center for Nanoscale Materials, Argonne National Laboratory, IL 60439, U.S.A.
Ralu Divan
Affiliation:
Center for Nanoscale Materials, Argonne National Laboratory, IL 60439, U.S.A.
C. Suzanne Miller
Affiliation:
Center for Nanoscale Materials, Argonne National Laboratory, IL 60439, U.S.A.
Daniel Rosenmann
Affiliation:
Center for Nanoscale Materials, Argonne National Laboratory, IL 60439, U.S.A.
Christopher Verzani
Affiliation:
University of Wisconsin – Stevens Point, WI 54481, U.S.A.
Endre Takács
Affiliation:
University of Debrecen, Debrecen, H-4010, Hungary
Michael P. Zach
Affiliation:
University of Wisconsin – Stevens Point, WI 54481, U.S.A.
Get access

Abstract

Patterned micro- and nanowires of several compositions in the solution series of BixTey were electrochemically deposited using Electroplate and Lift (E&L) Lithography on Ultrananocrystalline Diamond (UNCD) templates. The composition of the deposited BixTey wires was controlled by mixing saturated solutions of bismuth nitrate and tellurium in various ratios in the electroplating bath. All wires were electroplated via pulsed depositions at -1.4V vs. the saturated calomel electrode (SCE). The morphology and composition of all wires were studied by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). In general, the BixTey wires were fine-grained and brittle, often fracturing during the liftoff process. By contrast, wires containing less than 5% Te are smooth, and strong enough to support their own weight without a supporting medium for a length of over 100 times the wire diameter.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2012 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable