Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-15T23:05:18.501Z Has data issue: false hasContentIssue false

Electromagnetic Processing of Polymers: I. Basic Concepts and Molecular Design of The Macromolecules

Published online by Cambridge University Press:  28 February 2011

J. C. Hedrick
Affiliation:
Department of Chemistry, NSF Science and Technology Center: High Performance Polymeric Adhesives and Composites, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061-0212
D. A. Lewis
Affiliation:
Department of Chemistry, NSF Science and Technology Center: High Performance Polymeric Adhesives and Composites, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061-0212
T. C. Ward
Affiliation:
Department of Chemistry, NSF Science and Technology Center: High Performance Polymeric Adhesives and Composites, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061-0212
J. E. Mcgrath*
Affiliation:
Department of Chemistry, NSF Science and Technology Center: High Performance Polymeric Adhesives and Composites, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061-0212
*
To whom correspondence should be addressed
Get access

Abstract

Microwave processing has been utilized to process thermosetting polymeric materials. Specifically, fundamental studies relating epoxy network generation to processing conditions have been investigated in a tunable cylindrical cavity operating at a frequency of 2.45 GHz. These studies demonstrate that fully cured networks can be generated in ten minutes with the retention of good mechanical properties. Furthermore, toughened epoxy systems which utilize carefully designed amine terminated poly(arylene ether sulfone) thermoplastics as reactive oligomers have resulted in novel phase separated morphologies. In fact, it has been demonstrated that the morphology in these multiphase systems can actually be controlled by utilizing microwave processing. Bismaleimide toughened systems, devised by similar strategies, have demonstrated a 10–20 fold reduction in the time required to achieve full cure.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable